SOLVING THE FREE BOUNDARY PROBLEM IN CONTINUOUS CASTING BY USING BOUNDARY ELEMENT METHOD

ＳＯＬＶＩＮＧＴＨＥＦＲＥＥＢＯＵＮＤＡＲＹＰＲＯＢＬＥＭＩＮＣＯＮＴＩＮＵＯＵＳＣＡＳＴＩＮＧＢＹＵＳＩＮＧＢＯＵＮＤＡＲＹＥＬＥＭＥＮＴＭＥＴＨＯＤＬｉＹａｏｙｏｎｇ（李耀勇）；ＺｈａｎｇＺｈｉｌｉ（张自立）（ＲｅｃｅｉｖｅｄＪｕｎｅ，１８，１９...     

旋转圆盘受均布压力作用时的摄动分析

本文对中心带轴匀速旋转圆盘在均布压力作用下的受力及变形问题进行了摄动分析，得到了受载条件为Ｊ＾２／ＪＨ＜＜１时，圆盘应力及形变的渐近解。其形变渐近解为Ｗｈｉｔａｋｅｒ函数形式比较表明，渐近解与Ｃｈｅｂｙｓｈｅｖ数值解有较好的一致性。     

万有引力场中挠性联结双体系统的稳定性与分岔

本文讨论受万有引力矩作用沿圆轨道运动的挠性联结双体系统的平面天平动。讨论其相对轨道坐标系的可能平衡状态。利用Ｌｉａｐｕｎｏｖ直接法分析各平衡状态的稳定性。分析表明，当刚度系数足够小时，平衡状态呆产生分岔和稳定性突变。利用参数空间对系统的全局运动性态作出定性的描述。     

用白光相对客观散斑技术实测海冰力学性质的初探

本文提出了一种改进的白光散技术，应用此技术测量了单轴压缩下海冰的弹性模量，实测结果与电测法的结果符合程度良好，本文方法操作简单，避免了海水的表面缺隐和浸反射条件差以及表面升华等因素对测量的影响。     

给定寿命下的焊趾疲劳裂纹深度尺寸分析

本文提供并用统计方法研究了焊趾疲劳裂纹扩展的Ｎ～α曲线族，给出了联系给定裂纹尺寸下的疲劳分布，给定疲劳寿命下的裂纹尺寸分布以及随机初始条件的概率相容条件。研究表明，给定寿命下的焊趾疲劳裂纹深度尺寸α服从分布Ф［（μ（ａ）－ｌｏｇＮ）／σ（ａ）］。     

线性船舶兴波阻力边界元新方法

采用常数边界元对船舶与流体界面进行离散，求解船舶兴波势及船舶兴波阻力。这种方法可避免在船舶与流体自由面交线上安置节点，因而避免了这些节点建立补充方程。因为满足自由面条件的Ｈａｖｅｌｏｃｋ源函数的源点和场点不能同时在自由面上，使得自由面上的节点无法用Ｈａｖｅｌｏｃｋ源函数的建立方程。如对自由面交线上的节点建立补充方程，则要对线性自由面条件中包含的未知势函数的二阶导数用差分形式表达，引入较大误差。     

Influence of the Physical Nonlinearity of the Matrix on the Deformation of a Particulate Composite with Microdamageable Inclusions

The structural theory of short-term damage is generalized to particulate composites with nonlinearly elastic matrix and microdamageable inclusions. The basis for this generalization is the stochastic elasticity equations for a particulate composite with porous inclusions. Microvolumes of the material meet the Huber-Mises failure criterion. The damaged-microvolume balance equation and the equations relating macrostresses and macrostrains of a particulate composite with porous inclusions and physically nonlinear matrix constitute a closed-form system. This system describes the coupled processes of physically nonlinear deformation and microdamage. Algorithms for computing the microdamage-macrostrain relationships and deformation curves are proposed. Uniaxial tension curves are plotted for a particulate composite with linearly hardening matrix__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 4, pp. 3–11, April 2005.     

First- and second-order sensitivities of beams with respect to cross-sectional cracks

This paper deals with a variational formulation for the sensitivity problem of beam systems in the context of deformable solids with cracks. Natural frequencies are defined as state variables involved in the energy functional of the system, while the cracks length and position are treated as system parameters. The hierarchical equation system is formed and solved for the first and second derivatives of the natural frequency functions with respect to the cracks length and position. An analytical procedure for calculations of the second-order sensitivities of natural frequencies is proposed for the non-symmetrical equation system operator. Numerical algorithms are worked out and implemented computationally. Analytical and numerical aspects of the problem are discussed in detail through a number of illustrative results.The support of this work by the State Committee for Scientific Research (KBN) under Grant No. 4-050-0148/17-98-00 is gratefully acknowledged.     

无网格算法在多段翼型流动计算中的应用

研究了一种求解欧拉方程的无网格算法，发展出了一套布点及点云自动生成的方法；在点云离散的基础上，采用最小二乘法求解矛盾方程的方法来求取空间导数，进而获得数值通量；采用四步龙格-库塔方法进行时间推进，并引入当地时间步长和残值光顺等加速收敛措施。通过对NA-CA0012翼型的跨音速流动和多段翼型复杂绕流的数值模拟，验证了上述无网格算法的正确性和实用性。     

新型立式动平衡机的设计与分析

在分析传统的双面立式动平衡机的振动结构的基础上，设计了一种新的立式动平衡机的振动结构(即摆架)，采用新摆架结构的动平衡机可以实现静不平衡和偶不平衡的有效分离。文中详细分析了新摆架结构的特点，并在ANSYS7．0平台上对摆架进行了有限元模态分析和谐响应分析。由于新的摆架结构采用多块簧板，在多个部位刚度匹配，且采用多个传感器安装于测量点处，这样新的动平衡机可以直接测量静不平衡和偶不平衡，且相互影响极小。实践证明：采用新摆架结构的动平衡机特别适合于飞行物体的惯性测量，且克服了传统的双面立式动平衡机长期以来平面分离不佳的缺点，具有很高的推广价值。